AMI 4-HOUR METER READS
Intervals, registers and events delivered every 4 hours on
each electricity meter. (Network = 1 million meters.)
Itron Networks Demo
Proven, Open, Scalable.
Set network speed
Network speed determines the capacity of the network to support chosen use cases. Choose a speed to compare your network or network options with the capabilities of Itron Networks.
Choose a speed to compare your network’s capacity to
support your use cases with the capabilities of Itron Networks.
0.1
50
100
150
300
600
1200
2400
0.1
kbps
Add a use case Remove all use cases
Add
Remove
1-MINUTE LOAD DISAGGREGATION
1-minute usage data for calculating per device energy
consumption. (Performed on 25% of electricity meters.)
Add
Remove
15-MINUTE REAL-TIME STREAMING AMI DATA
15-minute usage data retrieved every 15 minutes for 100%
of electricity meters. (Network = 1 million meters.)
Add
Remove
DR TELEMETRY
Rapid delivery of meter telemetry and control commands to enhance
demand response programs. (Performed on 25% of electricity meters.)
Add
Remove
SOLAR INVERTERS—1-MINUTE POLLING
1-minute interval data collected from solar inverters.
(Network = 150,000 solar inverters.)
Add
Remove
5-MINUTE DA POLLING
Distribution Automation device polling supports 5-minute interval
data for each device. (Network = 2,000 DA endpoints.)
Add
Remove
FCI/ADVANCED DA
Fault circuit indicators and other devices that monitor the health
of the distribution grid in real time. (Network = 50,000 FCIs.)
Add
Remove
SUB-1-SECOND DA POLLING
1-second polling of DA devices for real-time localized monitoring
and control of grid devices. (Network = 2,000 DA endpoints.)
Add
Remove
STREET LIGHTS
Data collected from networked controls on each street light
in the city. (Network = 300,000 street lights.)
Add
Remove
GAS & WATER AMI
Gas and water metering, events and alarms.
(Network = 1 million water meters, 800,000 gas meters.)
Add
Remove
Network Utilization Total capacity utilized given the speed and use cases selected.
100
90
80
70
60
50
40
30
20
10
0
0
%
0
%
0
%
0
%
0
%
0
%
0
%
0
%
0
%
0
%
0
%
You’ve met max capacity
Either raise the NETWORK SPEED or remove USE CASES to return to available capacity. Either raise the NETWORK SPEED or remove USE CASES.
Drag
Drag
Results
Total Data usage Per Day
0 MB
Speed
0.1 kbps
UTILIZATION
0 %
Share Detailed Results
AMI 4-Hour Meter Reads
Typical AMI networks are designed to deliver usage
data every 4 hours. With the superior speed and
performance of an Itron network providing speeds
up to 2.4 Mbps, latency of 10 ms and dual band
meshing, utilities have the incremental network
capacity to deploy more applications and
more advanced use cases—all powered by
a unified communications platform.
Typical AMI networks are designed to deliver
usage data every 4 hours. With Itron Network speeds
up to 2.4 Mbps, latency of 10 ms and dual band
meshing, utilities have the capacity to deploy more
applications and more advanced use cases—all
powered by a unified communications platform.
1-Minute Load Disaggregation
On 25% of Meters
Generating value from analytics depends on the
utility’s ability to collect, ingest and analyze large
volumes of data from a variety of sources. Itron
network devices deliver highly granular usage
information, enabling faster, more precise insight
into customer usage patterns without impacting
the performance of other applications.
Utilities need to collect, ingest and analyze large
volumes of data from a variety of sources. Itron
network devices deliver highly granular usage
information, enabling faster, more precise
insight into usage patterns without impacting
performance of other applications.
15-Minute Real-Time
Streaming AMI Data
Itron Networks industry-leading speed and capacity enable
utilities to stream increasingly vast volumes of data
without crippling the network. Itron Networks deliver
usage data every 15 minutes from every meter to
enable near-real time monitoring and
measurement across the grid.
Stream vast volumes of data without crippling the
network. Itron Networks deliver usage data every
15 minutes from every meter to enable near-real
time monitoring and measurement across the grid.
DR Telemetry
Effectively managing distributed energy resources
requires reliable connectivity and control. Itron Networks
support for delivering near-real time data enables
utilities to fine-tune DR dispatch, issue rapid load
control commands, and improve the accuracy
of monitoring and verification to
boost DR program value.
Itron Networks support for near-real time data delivery
enables utilities to fine-tune DR dispatch, issue
rapid load control commands, and improve
the accuracy of monitoring and verification
to boost DR program value.
Solar Inverters
Using Itron Networks to deliver 1-minute interval data from
solar inverters enables DA equipment to make faster,
smarter decisions on how to optimize power flows
in response to temporary changes in energy
production by distributed energy resources (DERs).
As DER penetration increases, Itron Networks enhanced
performance enables utilities to stream
ever-increasing amounts of data without
compromising network performance.
With 1-minute interval data from solar inverters,
Itron Networks enables DA equipment to optimize power
flows in response to energy variations from distributed
energy resources (DERs). As DER penetration
increases, Itron Networks enables utilities to stream
ever-increasing amounts of data without
compromising performance.
5-Minute DA Polling
Distribution automation devices such as remote
terminal units and capacitor bank controllers are
typically polled every 5 minutes. Increasing network
speed and capacity through Itron Networks enables faster
data delivery and enhanced data granularity,
helping grid operators enhance situational
awareness and improve grid management.
Itron Networks speed and capacity enable more
effective polling of remote terminal units and
cap bank controllers for faster data delivery and
enhanced data granularity, enhancing situational
awareness and improving grid management.
FCI/Advanced DA
Intelligent devices such as fault circuit indicators (FCI)
form the core of a truly smart grid. FCIs are size
constrained and must operate reliably in varied
conditions, including on low-powered distribution
lines. Milli 5’s small form factor and power-optimized
design make it possible to add Itron Networks intelligence
to a variety of advanced DA devices.
Fault circuit indicators (FCIs) are size constrained
and must operate reliably in varied conditions,
including on low-powered distribution lines. Milli 5’s
small, power-optimized design makes it possible
to add Itron Networks intelligence to a variety of
advanced DA devices.
Sub 1-Second DA Polling
The superior performance, reliability and security of
Itron Networks power the utility’s most demanding grid
management applications. Supporting the low latency
required for sub-1 second polling, Itron Networks devices
deliver breakthrough improvements in
efficiency and reliability by optimizing
services locally within the mesh.
Supporting the low latency required for sub-1
second polling, Itron Networks devices deliver breakthrough
improvements in efficiency and reliability of
demanding grid management applications by
optimizing services locally within the mesh.
Street Lights
Street lights form a network canopy for smart city and
utility applications. The breakthrough performance
and reliability of Itron network technologies provide
ubiquitous connectivity and control across varied
operating environments, including dense urban
and remote topographies.
Street lights form a network canopy for smart
city and utility applications. Itron Networks breakthrough
performance and reliability provide ubiquitous
connectivity and control across varied operating
environments, including dense urban and
remote topographies.
Gas & Water AMI
Itron supports multi-service utilities through
an array of gas and water IMUs. Itron Network’s Milli 5 is a
low-powered and small-form-factor communications
module for ubiquitous, battery-powered connectivity
across numerous applications.
Itron supports multi-service utilities
through an array of gas and water IMUs. Itron Network’s
Milli 5 is a low-powered and small-form-factor
communications module for ubiquitous,
battery-powered connectivity across
numerous applications.
Itron Networks Demo
With Itron Networks, Itron builds upon network capabilities proven across global utilities and smart cities, extending its technology leadership. Access real-time operations data, support Distribution Automation use cases, power dynamic applications at the edge of the network, and introduce next-gen city services via Itron Networks.
With Itron Networks, Itron extends its technology leadership. Access real-time operations data, support Distribution Automation use cases, power dynamic applications at the edge of the network, and introduce next-gen city services via Itron Networks.
1
set network speed
USE THE SLIDER below the dial to set network speed.
The network speed can be adjusted at any time.
MOVE THE SLIDER to set the speed.
Adjust at any time.
2
add use cases
SELECT a combination (up to 10) to see the effect
on network utilization below and on city at right.
Select up to 10 to see the impact on network
utilization on the chart and map.
3
REVIEW NETWORK UTILIZATION
After making selections, review the UTILIZATION
graph and the RESULTS bar below right.
Results appear in the graph and in bar below
and to the right.
4
EXPLORE YOUR NETWORK
DRAG anywhere to explore the city view. Then CLICK
the USE CASE ICONS for a deeper dive into Itron Networks capabilities.
DRAG anywhere to explore. Then click USE CASE ICONS for a deeper dive into Itron Networks.
5
share detailed results
EMAIL yourself or a colleague the Network
Utilization RESULTS you've created.
Itron Networks Demo
Proven, Open, Scalable.
Itron is a world-leader in providing multi-application networks and services for smart infrastructure. Our proven IoT networks enable an open ecosystem of solutions and process billions of mission-critical transactions every year. We help cities and utilities maximize business outcomes and create more resourceful communities by generating valuable insight from intelligent edge devices and sensors.
Itron is a world-leader in providing multi-application networks and services for smart infrastructure. Our proven IoT networks enable an open ecosystem of solutions and process billions of mission-critical transactions every year. We help cities and utilities maximize business outcomes and create more resourceful communities by generating valuable insight from intelligent edge devices and sensors.
©2024 Itron, Inc. All rights reserved. Use cases presented are for illustration purposes only.